These limited edition pixels are from special runs made to order for our customers' projects. They differ from our standard pixels in at least one and sometimes several features: White only/RGB LEDs, jumper length, jumper color, clear/diffuse pixel head, clear/opaque housing, and waterproof rating. All of the options here are in units of 50 pixels (e.g. strands of 25 will come in pairs).
If you'd like to place an order for a custom run with specs not listed below, just give us a call. Special orders generally require 4 - 6 weeks for delivery.
For the general specs on Total Control Lighting, please see the item Total Control Lighting Pixel Strand of 50, above.
White-only pixels are especially elegant and brilliant for monochrome projects. Normally, a beautiful red, green, and blue LED is soldered to the output of our driver circuit. In this case, we've chosen a beautiful cool white LED and soldered it to the green output of our driver circuit. Power consumption at full brightness is about 1A. If you're ordering 4-pin male or female connectors, we recommend that you specify White in the Notes section -- it'll help you distinguish these strands from our RGB pixels. Available in bullets or squares. Standard distance between pixels: (3" for bullets; 4 1/2" for square base).
Extra-Long Jumper Wire
For projects that require longer distance between the pixels, we have strands of
-50 square-based pixels with 6" (14.25 cm) of wire from center to center (instead of the standard 4 1/3"). The jumper wire is gray.
-50 bullet with roughly a 1ft spacing. With frosted bulb.
-50 bullet with roughly a 1ft spacing. With water clear bulb.
-25 square based pixels with roughly a 1ft spacing. Black wires and black housing with frosted bulb.
Our standard pixels are cast with milky diffusion, allowing for a uniform glow. These special water-clear cast LEDs allow for each individual red, green, and blue LED to shine through, casting a mesmerizing splash of color onto any surface that they're aimed toward. The distance between pixels is the standard 3" from center to center with the lead wire fully extended.
Water-clear pixels are available in bullets, in strands of 50 or 25 (strands of 25 are sold in pairs for a total of 50 pixels).
Fragile pixels have the same spacing as the standard bullet and square-base configurations but without the silicon casing that isolates and protects the chip and with no waterproofing. With minimal electrical isolation/protection, this is the smallest and lightest configuration and is best for costumes and projects that won't see a lot of wear and tear.
The PVC mold that encases the chip on these pixels is opaque white instead of being the standard transparent PVC. They're available in strands of 50 bullets.
With 10 ultra-bright LEDs strapped to your bicycle spokes, the Mini Monkey Light M210 provides great visibility for bike commuters, cyclists, and bike partiers. With on-board buttons, you can choose from 15 patterns in 16 different colors for hundreds of combinations. 3AA batteries mounted on the hub provide up to 40 hours of visibility and wheel balance.
Waterproof, rugged, and light weight, it's not just for bicycles. Try it on anything that spins: ceiling fans, pin wheels, and more...
A burst of color ready to glow! All 10 colors of the Cool Neon rainbow soldered together. Just plug it into a driver that runs at least 10 feet. Great for costumes, bikes, and decorating anywhere, or to easily sample each color.
1 ft of High Bright Long Life 2.6mm wire in Yellow, Orange, Red, Pink, Purple, Blue, Aqua, Green, Lime Green, and White, soldered into one joint with a wire-side connector. Driver sold separately.
Base Price: $20
A burst of color ready to glow! All 10 colors of the Cool Neon rainbow soldered together. Just plug it into a driver that runs 10 feet. Great for costumes, bikes, and decorating anywhere, or to easily sample each color.
1 ft of High Bright Long Life 5.0mm in Yellow, Orange, Red, Pink, Purple, Blue, Aqua, Green, Lime Green, and White, soldered into one joint with a wire-side connector. Driver sold separately.
Let's say, for example, that you're lighting up the left and right side of your project with 100 pixels each. With this 4A power supply, your pixels will be super bright with only one power supply, saving you from getting a second one and a power-T connector.