Named after the first public art piece made with these LEDs -- Marco Cochrane's Safe Space beacons on the playa -- these blue LED rolls are as beautiful as they are a bargain. Double density 5 meter rolls (60 LEDs per meter) at this blowout price make that LED project that you've been dreaming of suddenly possible.
These rolls run on DC 12V and come with raw leads. Just solder a connector that's compatible with your power supply or controller (like a barrel connector or 9V snap), or order a custom solder joint.
These beautiful pixels combine the small size and low profile of the WS2812 chip with supple jumper wires to bring you strands of individually addressable LEDs that are perfect for costumes!
Strands of 50 pixels are offered in two lengths:
6cm jumper length (~ 2 1/2" center to center), total length ~ 10 feet
12cm jumper length (~ 4 7/8" center to center), total length ~ 20 feet
Each strand comes plug & play with a male round 4-pin TCL connector at the beginning and female one at the end.
Note: We highly recommend putting a dab of clear silicon on the back of each chip before working with these pixels. Doing this will help to protect the contact solder points from the tugs and pulls of costume wear.
Use with our Y Barrel Connector to power your LED strips at more than one insertion point for consistent lighting throughout your project.
Replaces the 12V 2500mA adapter at no additional cost!
Cool Neon Tubing - Flexible LED strips with 80 LEDs/meter and a height of 26mm. (Lower LED density and larger size compared to Cool Neon Tubing 2).
Great for signage.
Runs on 12V DC.
Sold by the foot.
Cool Neon Tubing -- Flexible LED Strips with 90 LEDs/meter and a height of 22mm (greater LED density and smaller size compared to Cool Neon Tubing 1).
Great for signage.
Runs on DC 12V.
Create your own Total Control Lighting Super Awesome Cube with these laser-cut acrylic cube faces. Each measures 7 1/2" x 7 1/4" and is ingeniously designed to form a cube when snapped together. All faces are identical -- just order four, five, or six to create a free-standing light box.
Each face has 25 laser-cut holes to hold a strand of 25 TCL Bullet or Square pixels. The 1/8" thickness fits perfectly into the détentes of our patented pixel moulds.
Slip some zip-ties (not included) through the laser-cut slots to easily secure the sides of the cube to each other.
Add an extra dimension and achieve a completely different effect with our faceted Keebler Cubes.
With thousands of these faces in stock, the possibilities are nearly infinite.
This is the 10M Angel Tears in full RGB beauty.
A strand of LEDs as close as we've seen to droplets of light. You can weave it through your clothes, your hair, your bike, or anything your choose. Practically weightless and otherwise invisible, Angel Tears will give any project an ethereal quality.
Each single-color strand is 10 meters long (~33 1/3 feet), with 100 LEDs spaced every 4". It runs off DC 12 V using a pre-soldered barrel connector. Each strand comes with a free plug & play input connector and an 8AA battery cage.
Each single-color strand is 10 meters long (~33 1/3 feet), with 100 LEDs spaced every 4". Note: The RGB strand is 5 meters long with 50 LEDs. It runs off DC 12 V using a pre-soldered barrel connector. Each strand comes with a free plug & play input connector and an 8AA battery cage.