|Each of the 50 pixels on the Total Control Lighting Pixel strand is individually addressable (any LED can be its own color and brightness independent from every other LED) and can display millions of colors.
4-pin waterproof connectors at both ends of the strand mate to our Total Control Lighting controllers, Power T-Connectors, and each other to daisy chain multiple strands end-to-end. For extensions, we recommend AWG 22 lead wire.
5V power, 60mA maximum per pixel (LED on full white)
Brightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd,
Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree
Pixels come in two standard configurations:
Pixels now come in black pvc with black wires!!!
Shape: the LED sits atop a 3/4" x 3/4" square base. The lead wire enters the base on one side and
exits the opposite side.
Length between pixels: 4 1/2" from center to center with lead wire fully extended (lead wire can Total length of strand: ~ 19 feet from first to last pixel.
be doubled back for shorter lengths).
Recommended peg hole size: .450"Bullet:
Shape: the LED sits atop a 1 1/8" tall cylindrical casing that has
ridges of progressively increasing widths (maximum ~ 5/8").
Length between pixels: 3" from center to center with lead
wire fully extended (lead wire can be doubled back for shorter lengths).
Total length of strand: ~ 14 1/3 feet from first to last pixel.
Recommended peg hole size: .450" for smaller hole or .555" for larger hole
Laser cut hole for 2nd detent on bullet .580"
7/16 drill bit
7/16 whole punch from ACE
Power consumption of each strand at 5vDC: 100% green = .8 amp; 100% blue = .82 amp; 100% red = .935 amp.
Note: The spacing between the pixels is now about 1/4 inch smaller than pixels sold prior to August 2012. If you need the old spacing, please let us know.