|
 |
 |
 |
Slim Controller (LEDF3CHC) |
|
|
 |
 |
This super sleek and amazingly versatile Slim Controller plugs into either the 3-Channel LED or the RGB LED strips to give you inline control over the pattern, blink rate, brightness, and channel/color.
With the 3-Channel LED strips, you'll have 20 flashing or sequencing patterns at 10 possible speeds and 20 static patterns at 5 possible levels of brightness. That's 300 patterns to choose from! With the RGB LED strips, you'll be able to choose among 20 different static colors at 5 levels of brightness and 20 flashing or transitioning color patterns at 10 levels of speed. This Slim Controller has a flat female 4-pin connector on one end and a female barrel connector at the other. It runs off 5V - 24V DC, so it's compatible with both 5V systems like the 3-Channel Strips (use a 5V power supply) and 12V systems like the RGB LED strips (use a 12vDC input connector and an 8AA battery cage or 12V AC power supply). 7" long x 1/2" wide by 1/4" thick Base Price: $20
|
|
 |
|
RGB LED Roll Single Density (RGBROLLSD) |
|
WEATHERPROOF OPTION NOW ON 65% SALE! Sale Price: $35 (Option without weatherproof coating at the regular price of $100)
Our RGB LED Roll will bring brilliant color and light to any space. Each flexible Single Density strip has 150 Super Bright RGB LEDS (30 RGB LEDs per meter). The color, brightness, and pattern of the entire roll can be remotely controlled with one of our Infrared RGB LED controllers (sold separately). Each roll is 5 meters long, or almost 16 1/2 feet. On the back is a self-adhesive strip for easy installation. Strips are 3/8" wide and only 1/8" thick!
Our strips can be lit using batteries or House Current (see below for power supplies sold separately). Rolls can be cut about every 4" for shorter strips (each strip will need a 4-pin connector soldered onto it). Each roll is currently sold with one connector pre-soldered. Additional 4-pin connectors are sold separately. Now with options! Rolls come with either a weatherproof silicon coating for outer protection or without any coating for more durability during movement (the latter is recommended for costumes worn indoors).
PLEASE NOTE: Rolls should be uncoiled before lit to allow heat to dissipate.
Base Price: $100 |
 |
 |
 |
|
|
 |
|
|
|
|
|
|
|
8AA Battery Cage (AC8AAL) |
|
Highly recommended! Use this 8AA Battery Cage instead of a 9V battery for items that can run on DC 12V. Using 8 AA batteries (8 x 1.5V = 12V) will make your lights glow brighter and longer.
This cage easily attaches to the 9V snap on many of our Cool Neon drivers and sequencers, our DC 12V Rope Light connector, and our RGB LED controllers (with a barrel connector sold separately). Please note exceptions: This cage should not be used with the 9V Variable Speed Driver or the 9V snap in the internal compartment of the CAT-09 Sequencer (instead, attach the battery cage to the port on the outside of the sequencer with the included connector). Dimensions: 1 1/8" x 1 1/8" x 4 1/4" Base Price: $2.00; batteries not included.
|
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|