Adjust the brightness of your LEDs or make them flash - remotely - with this Twinkle Controller. Simply plug it between your power supply (like your AC Adapter) and your lights or RGB controller. The infrared remote control pad lets you select on/off, the brightness level at increments of 10%, and 5 flash patterns: strobe, flash with pause, flash, fade, and pulse.
Input and output are for barrel connectors. Check the connector on your lights and controllers to confirm that they're compatible.
Runs on DC 12V. Works with our RGB Rolls, Olympic LED Strips, Blue LED Strip, 10M Angel Tears, and Rope Lights.
RF remote control pad included.
Base price: $20
You can light up a mountain with these LEDs. Literally. Whether you sew them on for a little night-time snowboarding or to create your own equally amazing project, these white-only LEDs will make you see things in a dazzling light.
These 5-meter rolls have 30 super-bright white LEDs per meter and run on 12vDC. The strips are encased in a weatherproof (IP65) silicon sleeve (with no adhesive backing) and have raw leads on both ends. Power consumption is only 7.2W/meter (1.88 Amps @ 12V for the entire 5m roll).
provide 20-22 lumens per LED.
Base Price: $30/roll
20-22 lumens per LED.
Either option is weatherproof (IP65).
Base Price: $60/5m roll
A controller built into the strip creates streaks of white in chasing patterns that are too many and too fast to count.
These single density rolls (30 LEDs per meter) run on DC 12V and come with one female barrel connector soldered to the beginning. Just connect to one of our recommended DC 12V power supplies. Silicon coating on one side and a self-adhesive backing on the other.
A strand of LEDs as close as we've ever come to droplets of light. Practically weightless and otherwise invisible, they'll give any project an ethereal quality.
20 tiny LEDs are spaced every 4" over a strand of wire more than 6 feet long. You can weave it through your clothes, your hair, or anything your choose.
The battery pack holds 3 AA batteries (not included) and has an on/off switch. The RGB strand lights in a varied blink mode only; every other strand of color lights in constant mode only.
The battery door is pretty secure by itself, but for extra security, use the small phillips screw that comes with it (you'll need a small phillips screwdriver).
A strand of LEDs as close as we've seen to droplets of light. You can weave it through your clothes, your hair, your bike, or anything your choose. Practically weightless and otherwise invisible, Angel Tears will give any project an ethereal quality.
Each single-color strand is 10 meters long (~33 1/3 feet), with 100 LEDs spaced every 4". Note: The RGB strand is 5 meters long with 50 LEDs. It runs off DC 12 V using a pre-soldered barrel connector. Each strand comes with a free plug & play input connector and an 8AA battery cage.