keebler cubes, diffuser, led, total control lighting
These faceted diffusers fit over individual Total Control pixels to multiply each point of light. No tripping required!
1 3/8" x 1 3/8" x 1 3/8"
Base Price: $.25/each
Not your ordinary Christmas lights, Keebler Lights are strands of LED bulbs each covered with a 16-faceted Keebler Cube, multiplying the color of each bulb into a constellation of light. Each bulb flashes between either red & blue or red & green.
Choose between 12v DC (batteries not included) or 110v AC. The 12v DC strand ends in a 9V battery snap that can easily snap onto an 8AA battery cage or an AC power adapter (sold separately). The 110v AC strand ends in a plug for a standard outlet.
20 LEDs per strand, 8 1/2" between each pixel, ~ 13 feet from 1st to last pixel and 2 - 3 foot lead to power connection.
Base Price: $10
These strands of 25 Total Control pixels offer the ultimate in custom
lighting. Each LED is individually addressable to be of any color or
brightness independent of every other LED.
A 4-pin waterproof
connector at each end connects the strand to our Total Control Lighting
controllers, Power-T Connectors, or to another strand of pixels
25-pixel strands can be powered by batteries for
complete portability, by house current with regulated 5vDC, or, if only a single strand, by USB or car cigarette adapter.
Twice as much beauty as the 25-pixel strands of Total Control Lighting!
Each LED is individually addressable to be of any color or brightness independent of every other LED.
A 4-pin waterproof connector at each end of the strand connects it to our Total Control Lighting controllers, Power-T Connectors, or to another strand of pixels end-to-end.
50-pixel strands can be powered by either batteries for
complete portability or by house current with regulated 5vDC.
Pixels come in two standard configurations: square or bullet.
Pixels now come in black pvc with black wires!!!
These limited edition pixels are from special runs made to order for our customers' projects. They differ from our standard pixels in at least one and sometimes several features: White only/RGB LEDs, jumper length, jumper color, clear/diffuse pixel head, clear/opaque housing, and waterproof rating. All of the options here are in units of 50 pixels (e.g. strands of 25 will come in pairs).
If you'd like to place an order for a custom run with specs not listed below, just give us a call. Special orders generally require 4 - 6 weeks for delivery.
For the general specs on Total Control Lighting, please see the item Total Control Lighting Pixel Strand of 50, above.
White-only pixels are especially elegant and brilliant for monochrome projects. Normally, a beautiful red, green, and blue LED is soldered to the output of our driver circuit. In this case, we've chosen a beautiful cool white LED and soldered it to the green output of our driver circuit. Power consumption at full brightness is about 1A. If you're ordering 4-pin male or female connectors, we recommend that you specify White in the Notes section -- it'll help you distinguish these strands from our RGB pixels. Available in bullets or squares. Standard distance between pixels: (3" for bullets; 4 1/2" for square base).
Extra-Long Jumper Wire
For projects that require longer distance between the pixels, we have strands of
-50 square-based pixels with 6" (14.25 cm) of wire from center to center (instead of the standard 4 1/3"). The jumper wire is gray.
-50 bullet with roughly a 1ft spacing. With frosted bulb.
-50 bullet with roughly a 1ft spacing. With water clear bulb.
-25 square based pixels with roughly a 1ft spacing. Black wires and black housing with frosted bulb.
Our standard pixels are cast with milky diffusion, allowing for a uniform glow. These special water-clear cast LEDs allow for each individual red, green, and blue LED to shine through, casting a mesmerizing splash of color onto any surface that they're aimed toward. The distance between pixels is the standard 3" from center to center with the lead wire fully extended.
Water-clear pixels are available in bullets, in strands of 50 or 25 (strands of 25 are sold in pairs for a total of 50 pixels).
Fragile pixels have the same spacing as the standard bullet and square-base configurations but without the silicon casing that isolates and protects the chip and with no waterproofing. With minimal electrical isolation/protection, this is the smallest and lightest configuration and is best for costumes and projects that won't see a lot of wear and tear.
The PVC mold that encases the chip on these pixels is opaque white instead of being the standard transparent PVC. They're available in strands of 50 bullets.