This is the 10M Angel Tears in full RGB beauty.
A strand of LEDs as close as we've seen to droplets of light. You can weave it through your clothes, your hair, your bike, or anything your choose. Practically weightless and otherwise invisible, Angel Tears will give any project an ethereal quality.
Each single-color strand is 10 meters long (~33 1/3 feet), with 100 LEDs spaced every 4". It runs off DC 12 V using a pre-soldered barrel connector. Each strand comes with a free plug & play input connector and an 8AA battery cage.
Each single-color strand is 10 meters long (~33 1/3 feet), with 100 LEDs spaced every 4". Note: The RGB strand is 5 meters long with 50 LEDs. It runs off DC 12 V using a pre-soldered barrel connector. Each strand comes with a free plug & play input connector and an 8AA battery cage.
Adjust the brightness of your LEDs or make them flash - remotely - with this Twinkle Controller. Simply plug it between your power supply (like your AC Adapter) and your lights or RGB controller. The infrared remote control pad lets you select on/off, the brightness level at increments of 10%, and 5 flash patterns: strobe, flash with pause, flash, fade, and pulse.
Input and output are for barrel connectors. Check the connector on your lights and controllers to confirm that they're compatible.
Runs on DC 12V. Works with our RGB Rolls, Olympic LED Strips, Blue LED Strip, 10M Angel Tears, and Rope Lights.
RF remote control pad included.
Base price: $20
The SUPER BRIGHT Rope Lights run on either 12vDC or House Current. Choose which type of rope light you'd like when selecting your color.
Rope lights are sold and cut by the meter (approximately 3 feet 3 inches). Order as long a length as you want: it'll come as one continuous piece.
Base Price: $8 per meter
A controller built into the strip creates streaks of white in chasing patterns that are too many and too fast to count.
These single density rolls (30 LEDs per meter) run on DC 12V and come with one female barrel connector soldered to the beginning. Just connect to one of our recommended DC 12V power supplies. Silicon coating on one side and a self-adhesive backing on the other.
We've been as impatient as you to get these back in stock and now they're here, brighter and better than ever!
These flexible, flat ribbons have a glowing area that's 1 meter long by almost 3/4" wide. With a connector at either end, you can cut the ribbon and use it as two separate pieces, or attach them end-to-end.
One plug & play wire-side connector is included with each ribbon. Additional connectors can be ordered separately for $2 each
NOTE: To figure out which drivers are powerful enough to light up your ribbons, use one ribbon = 40ft of Cool Neon EL Wire. Be sure to use a regulated power supply, such as batteries or the AC 1.2A Regulated Power Adapter (ACBB) with a 12v driver.
20-22 lumens per LED.
Either option is weatherproof (IP65).
Base Price: $60/5m roll